Makefile
17833 bytes
1ifndef VERBOSE
2.SILENT:
3endif
4
5# Never run this makefile in parallel, as it could screw things up
6# It won't affect the submakes, so you still get the speedup from specifying -jx
7.NOTPARALLEL:
8
9# Allow the silent with lower caps to work the same way as upper caps
10ifdef silent
11 SILENT = $(silent)
12endif
13
14ifdef SILENT
15 SUB_IS_SILENT := $(SILENT)
16endif
17
18# We need to make sure that silent is always turned off at the top level
19# Otherwise the [OK], [ERROR] and [WARN] messages won't be displayed correctly
20override SILENT := false
21
22ifeq ($(shell git rev-parse --is-inside-work-tree 2>/dev/null),)
23 export SKIP_GIT := yes
24 export NOT_REPO := yes
25endif
26
27ifdef SKIP_VERSION
28 export SKIP_GIT := yes
29endif
30
31ifndef SUB_IS_SILENT
32ifndef SKIP_GIT
33 QMK_VERSION := $(shell git describe --abbrev=0 --tags 2>/dev/null)
34endif
35
36ifneq ($(QMK_VERSION),)
37$(info QMK Firmware $(QMK_VERSION))
38endif
39endif
40
41# Try to determine userspace from qmk config, if set.
42ifeq ($(QMK_USERSPACE),)
43 QMK_USERSPACE = $(shell qmk config -ro user.overlay_dir | cut -d= -f2 | sed -e 's@^None$$@@g')
44endif
45
46# Determine which qmk cli to use
47QMK_BIN := qmk
48
49# avoid 'Entering|Leaving directory' messages
50MAKEFLAGS += --no-print-directory
51
52ON_ERROR := error_occurred=1
53
54BREAK_ON_ERRORS = no
55
56ROOT_DIR := $(dir $(lastword $(MAKEFILE_LIST)))
57ifeq ($(ROOT_DIR),)
58 ROOT_DIR := .
59endif
60
61include paths.mk
62
63TEST_OUTPUT_DIR := $(BUILD_DIR)/test
64ERROR_FILE := $(BUILD_DIR)/error_occurred
65
66.DEFAULT_GOAL := all:all
67
68
69# Compare the start of the RULE variable with the first argument($1)
70# If the rules equals $1 or starts with $1:, RULE_FOUND is set to true
71# and $1 is removed from the RULE variable
72# Otherwise the RULE_FOUND variable is set to false, and RULE left as it was
73# The function is a bit tricky, since there's no built in $(startswith) function
74define COMPARE_AND_REMOVE_FROM_RULE_HELPER
75 ifeq ($1,$$(RULE))
76 RULE:=
77 RULE_FOUND := true
78 else
79 STARTCOLON_REMOVED=$$(subst START$1:,,START$$(RULE))
80 ifneq ($$(STARTCOLON_REMOVED),START$$(RULE))
81 RULE_FOUND := true
82 RULE := $$(STARTCOLON_REMOVED)
83 else
84 RULE_FOUND := false
85 endif
86 endif
87endef
88
89# This makes it easier to call COMPARE_AND_REMOVE_FROM_RULE, since it makes it behave like
90# a function that returns the value
91COMPARE_AND_REMOVE_FROM_RULE = $(eval $(call COMPARE_AND_REMOVE_FROM_RULE_HELPER,$1))$(RULE_FOUND)
92
93# Try to find a match for the start of the rule to be checked
94# $1 The list to be checked
95# If a match is found, then RULE_FOUND is set to true
96# and MATCHED_ITEM to the item that was matched
97define TRY_TO_MATCH_RULE_FROM_LIST_HELPER
98 # Split on ":", padding with empty strings to avoid indexing issues
99 TOKEN1:=$$(shell python3 -c "import sys; print((sys.argv[1].split(':',1)+[''])[0])" $$(RULE))
100 TOKENr:=$$(shell python3 -c "import sys; print((sys.argv[1].split(':',1)+[''])[1])" $$(RULE))
101
102 FOUNDx:=$$(shell echo $1 | tr " " "\n" | grep -Fx $$(TOKEN1))
103 ifneq ($$(FOUNDx),)
104 RULE := $$(TOKENr)
105 RULE_FOUND := true
106 MATCHED_ITEM := $$(TOKEN1)
107 else
108 RULE_FOUND := false
109 MATCHED_ITEM :=
110 endif
111endef
112
113# Make it easier to call TRY_TO_MATCH_RULE_FROM_LIST
114TRY_TO_MATCH_RULE_FROM_LIST = $(eval $(call TRY_TO_MATCH_RULE_FROM_LIST_HELPER,$1))$(RULE_FOUND)
115
116define ALL_IN_LIST_LOOP
117 OLD_RULE$1 := $$(RULE)
118 $$(eval $$(call $1,$$(ITEM$1)))
119 RULE := $$(OLD_RULE$1)
120endef
121
122define PARSE_ALL_IN_LIST
123 $$(foreach ITEM$1,$2,$$(eval $$(call ALL_IN_LIST_LOOP,$1)))
124endef
125
126# The entry point for rule parsing
127# parses a rule in the format <keyboard>:<keymap>:<target>
128# but this particular function only deals with the first <keyboard> part
129define PARSE_RULE
130 RULE := $1
131 COMMANDS :=
132 # If the rule starts with all, then continue the parsing from
133 # PARSE_ALL_KEYBOARDS
134 ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,all),true)
135 KEYBOARD_RULE=all
136 $$(eval $$(call PARSE_ALL_KEYBOARDS))
137 else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,test),true)
138 $$(eval $$(call PARSE_TEST))
139 # If the rule starts with the name of a known keyboard, then continue
140 # the parsing from PARSE_KEYBOARD
141 else ifeq ($$(call TRY_TO_MATCH_RULE_FROM_LIST,$$(shell $(QMK_BIN) list-keyboards --no-resolve-defaults)),true)
142 KEYBOARD_RULE=$$(MATCHED_ITEM)
143 $$(eval $$(call PARSE_KEYBOARD,$$(MATCHED_ITEM)))
144 else
145 $$(info make: *** No rule to make target '$1'. Stop.)
146 $$(info |)
147 $$(info | QMK's make format is:)
148 $$(info | make keyboard_folder:keymap_folder[:target])
149 $$(info |)
150 $$(info | Where `keyboard_folder` is the path to the keyboard relative to)
151 $$(info | `qmk_firmware/keyboards/`, and `keymap_folder` is the name of the)
152 $$(info | keymap folder under that board's `keymaps/` directory.)
153 $$(info |)
154 $$(info | Examples:)
155 $$(info | keyboards/dz60, keyboards/dz60/keymaps/default)
156 $$(info | -> make dz60:default)
157 $$(info | -> qmk compile -kb dz60 -km default)
158 $$(info | keyboards/planck/rev6, keyboards/planck/keymaps/default)
159 $$(info | -> make planck/rev6:default:flash)
160 $$(info | -> qmk flash -kb planck/rev6 -km default)
161 $$(info |)
162 endif
163endef
164
165# $1 = Keyboard
166# Parses a rule in the format <keymap>:<target>
167# the keyboard is already known when entering this function
168define PARSE_KEYBOARD
169 # If we want to compile the default subproject, then we need to
170 # include the correct makefile to determine the actual name of it
171 CURRENT_KB := $1
172
173 # KEYBOARD_FOLDERS := $$(subst /, , $(CURRENT_KB))
174
175 DEFAULT_FOLDER := $$(CURRENT_KB)
176
177 # We assume that every rules.mk will contain the full default value
178 $$(eval include $(ROOT_DIR)/keyboards/$$(CURRENT_KB)/rules.mk)
179 ifneq ($$(DEFAULT_FOLDER),$$(CURRENT_KB))
180 $$(eval include $(ROOT_DIR)/keyboards/$$(DEFAULT_FOLDER)/rules.mk)
181 endif
182 CURRENT_KB := $$(DEFAULT_FOLDER)
183
184 # 5/4/3/2/1
185 KEYBOARD_FOLDER_PATH_1 := $$(CURRENT_KB)
186 KEYBOARD_FOLDER_PATH_2 := $$(patsubst %/,%,$$(dir $$(KEYBOARD_FOLDER_PATH_1)))
187 KEYBOARD_FOLDER_PATH_3 := $$(patsubst %/,%,$$(dir $$(KEYBOARD_FOLDER_PATH_2)))
188 KEYBOARD_FOLDER_PATH_4 := $$(patsubst %/,%,$$(dir $$(KEYBOARD_FOLDER_PATH_3)))
189 KEYBOARD_FOLDER_PATH_5 := $$(patsubst %/,%,$$(dir $$(KEYBOARD_FOLDER_PATH_4)))
190
191 KEYMAPS :=
192 # get a list of all keymaps
193 KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_1)/keymaps/*/.)))
194 KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_2)/keymaps/*/.)))
195 KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_3)/keymaps/*/.)))
196 KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_4)/keymaps/*/.)))
197 KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_5)/keymaps/*/.)))
198
199 ifneq ($(QMK_USERSPACE),)
200 KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(QMK_USERSPACE)/keyboards/$$(KEYBOARD_FOLDER_PATH_1)/keymaps/*/.)))
201 KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(QMK_USERSPACE)/keyboards/$$(KEYBOARD_FOLDER_PATH_2)/keymaps/*/.)))
202 KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(QMK_USERSPACE)/keyboards/$$(KEYBOARD_FOLDER_PATH_3)/keymaps/*/.)))
203 KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(QMK_USERSPACE)/keyboards/$$(KEYBOARD_FOLDER_PATH_4)/keymaps/*/.)))
204 KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(QMK_USERSPACE)/keyboards/$$(KEYBOARD_FOLDER_PATH_5)/keymaps/*/.)))
205 endif
206
207 KEYBOARD_LAYOUTS := $(shell $(QMK_BIN) list-layouts --keyboard $1)
208 LAYOUT_KEYMAPS :=
209 $$(foreach LAYOUT,$$(KEYBOARD_LAYOUTS),$$(eval LAYOUT_KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/layouts/*/$$(LAYOUT)/*/.)))))
210 ifneq ($(QMK_USERSPACE),)
211 $$(foreach LAYOUT,$$(KEYBOARD_LAYOUTS),$$(eval LAYOUT_KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(QMK_USERSPACE)/layouts/$$(LAYOUT)/*/.)))))
212 endif
213
214 KEYMAPS := $$(sort $$(KEYMAPS) $$(LAYOUT_KEYMAPS))
215
216 # if the rule after removing the start of it is empty (we haven't specified a kemap or target)
217 # compile all the keymaps
218 ifeq ($$(RULE),)
219 $$(eval $$(call PARSE_ALL_KEYMAPS))
220 # The same if all was specified
221 else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,all),true)
222 $$(eval $$(call PARSE_ALL_KEYMAPS))
223 # List all keymaps for the given keyboard
224 else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,list-keymaps),true)
225 $$(eval $$(call LIST_ALL_KEYMAPS))
226 # Try to match the specified keyamp with the list of known keymaps
227 else ifeq ($$(call TRY_TO_MATCH_RULE_FROM_LIST,$$(KEYMAPS)),true)
228 $$(eval $$(call PARSE_KEYMAP,$$(MATCHED_ITEM)))
229 # Otherwise try to match the keymap from the current folder, or arguments to the make command
230 else ifneq ($$(KEYMAP),)
231 $$(eval $$(call PARSE_KEYMAP,$$(KEYMAP)))
232 # Otherwise if we are running make all:<user> just skip
233 else ifeq ($$(KEYBOARD_RULE),all)
234 # $$(info Skipping: No user keymap for $$(CURRENT_KB))
235 # Otherwise, make all keymaps, again this is consistent with how it works without
236 # any arguments
237 else
238 $$(eval $$(call PARSE_ALL_KEYMAPS))
239 endif
240endef
241
242# if we are going to compile all keyboards, match the rest of the rule
243# for each of them
244define PARSE_ALL_KEYBOARDS
245 $$(eval $$(call PARSE_ALL_IN_LIST,PARSE_KEYBOARD,$(shell $(QMK_BIN) list-keyboards --no-resolve-defaults)))
246endef
247
248# Prints a list of all known keymaps for the given keyboard
249define LIST_ALL_KEYMAPS
250 COMMAND_true_LIST_KEYMAPS := \
251 printf "$$(KEYMAPS)\n";
252 COMMAND_false_LIST_KEYMAPS := \
253 printf "$$(MSG_AVAILABLE_KEYMAPS)\n"; \
254 printf "$$(KEYMAPS)\n";
255 COMMANDS += LIST_KEYMAPS
256endef
257
258# $1 Keymap
259# This is the meat of compiling a keyboard, when entering this, everything is known
260# keyboard, subproject, and keymap
261# Note that we are not directly calling the command here, but instead building a list,
262# which will later be processed
263define PARSE_KEYMAP
264 CURRENT_KM = $1
265 # The rest of the rule is the target
266 # Remove the leading ":" from the target, as it acts as a separator
267 MAKE_TARGET := $$(patsubst :%,%,$$(RULE))
268 # We need to generate an unique identifier to append to the COMMANDS list
269 CURRENT_KB_UNDER := $$(subst /,_,$$(CURRENT_KB))
270 COMMAND := COMMAND_KEYBOARD_$$(CURRENT_KB_UNDER)_KEYMAP_$$(CURRENT_KM)
271 # If we are compiling a keyboard without a subproject, we want to display just the name
272 # of the keyboard, otherwise keyboard/subproject
273 KB_SP := $$(CURRENT_KB)
274 # Format it in bold
275 KB_SP := $(BOLD)$$(KB_SP)$(NO_COLOR)
276 # Specify the variables that we are passing forward to submake
277 MAKE_VARS := KEYBOARD=$$(CURRENT_KB) KEYMAP=$$(CURRENT_KM) QMK_BIN=$$(QMK_BIN)
278 # And the first part of the make command
279 MAKE_CMD := $$(MAKE) -r -R -C $(ROOT_DIR) -f $(BUILDDEFS_PATH)/build_keyboard.mk $$(MAKE_TARGET)
280 # The message to display
281 MAKE_MSG := $$(MSG_MAKE_KB)
282 # We run the command differently, depending on if we want more output or not
283 # The true version for silent output and the false version otherwise
284 $$(eval $$(call BUILD))
285endef
286
287define BUILD
288 MAKE_VARS += VERBOSE=$(VERBOSE) COLOR=$(COLOR)
289 COMMANDS += $$(COMMAND)
290 COMMAND_true_$$(COMMAND) := \
291 printf "$$(MAKE_MSG)" | \
292 $$(MAKE_MSG_FORMAT); \
293 LOG=$$$$($$(MAKE_CMD) $$(MAKE_VARS) SILENT=true 2>&1) ; \
294 if [ $$$$? -gt 0 ]; \
295 then $$(PRINT_ERROR_PLAIN); \
296 elif [ "$$$$LOG" = "skipped" ] ; \
297 then $$(PRINT_SKIPPED_PLAIN); \
298 elif [ "$$$$LOG" != "" ] ; \
299 then $$(PRINT_WARNING_PLAIN); \
300 else \
301 $$(PRINT_OK); \
302 fi;
303 COMMAND_false_$$(COMMAND) := \
304 printf "$$(MAKE_MSG)\n\n"; \
305 $$(MAKE_CMD) $$(MAKE_VARS) SILENT=false; \
306 if [ $$$$? -gt 0 ]; \
307 then error_occurred=1; \
308 fi;
309endef
310
311# Just parse all the keymaps for a specific keyboard
312define PARSE_ALL_KEYMAPS
313 $$(eval $$(call PARSE_ALL_IN_LIST,PARSE_KEYMAP,$$(KEYMAPS)))
314endef
315
316define BUILD_TEST
317 TEST_PATH := $1
318 TEST_NAME := $$(notdir $$(TEST_PATH))
319 TEST_FULL_NAME := $$(subst /,_,$$(patsubst $$(ROOT_DIR)tests/%,%,$$(TEST_PATH)))
320 MAKE_TARGET := $2
321 COMMAND := $1
322 MAKE_CMD := $$(MAKE) -r -R -C $(ROOT_DIR) -f $(BUILDDEFS_PATH)/build_test.mk $$(MAKE_TARGET)
323 MAKE_VARS := TEST=$$(TEST_NAME) TEST_OUTPUT=$$(TEST_FULL_NAME) TEST_PATH=$$(TEST_PATH) FULL_TESTS="$$(FULL_TESTS)"
324 MAKE_MSG := $$(MSG_MAKE_TEST)
325 $$(eval $$(call BUILD))
326 ifneq ($$(MAKE_TARGET),clean)
327 TEST_EXECUTABLE := $$(TEST_OUTPUT_DIR)/$$(TEST_FULL_NAME).elf
328 TESTS += $$(TEST_FULL_NAME)
329 TEST_MSG := $$(MSG_TEST)
330 $$(TEST_FULL_NAME)_COMMAND := \
331 printf "$$(TEST_MSG)\n"; \
332 $$(TEST_EXECUTABLE); \
333 if [ $$$$? -gt 0 ]; \
334 then error_occurred=1; \
335 fi; \
336 printf "\n";
337 endif
338endef
339
340define LIST_TEST
341 include $(BUILDDEFS_PATH)/testlist.mk
342 FOUND_TESTS := $$(patsubst ./tests/%,%,$$(TEST_LIST))
343 $$(info $$(FOUND_TESTS))
344endef
345
346define PARSE_TEST
347 TESTS :=
348 TEST_NAME := $$(firstword $$(subst :, ,$$(RULE)))
349 TEST_TARGET := $$(subst $$(TEST_NAME),,$$(subst $$(TEST_NAME):,,$$(RULE)))
350 include $(BUILDDEFS_PATH)/testlist.mk
351 ifeq ($$(TEST_NAME),all)
352 MATCHED_TESTS := $$(TEST_LIST)
353 else
354 MATCHED_TESTS := $$(foreach TEST, $$(TEST_LIST),$$(if $$(findstring x$$(TEST_NAME)x, x$$(patsubst ./tests/%,%,$$(TEST)x)), $$(TEST),))
355 endif
356 $$(foreach TEST,$$(MATCHED_TESTS),$$(eval $$(call BUILD_TEST,$$(TEST),$$(TEST_TARGET))))
357endef
358
359
360# Set the silent mode depending on if we are trying to compile multiple keyboards or not
361# By default it's on in that case, but it can be overridden by specifying silent=false
362# from the command line
363define SET_SILENT_MODE
364 ifdef SUB_IS_SILENT
365 SILENT_MODE := $(SUB_IS_SILENT)
366 else ifeq ($$(words $$(COMMANDS)),1)
367 SILENT_MODE := false
368 else
369 SILENT_MODE := true
370 endif
371endef
372
373include $(BUILDDEFS_PATH)/message.mk
374
375ifeq ($(strip $(BREAK_ON_ERRORS)), yes)
376HANDLE_ERROR = exit 1
377else
378HANDLE_ERROR = echo $$error_occurred > $(ERROR_FILE)
379endif
380
381# The empty line is important here, as it will force a new shell to be created for each command
382# Otherwise the command line will become too long with a lot of keyboards and keymaps
383define RUN_COMMAND
384+error_occurred=0;\
385$(COMMAND_$(SILENT_MODE)_$(COMMAND))\
386if [ $$error_occurred -gt 0 ]; then $(HANDLE_ERROR); fi;
387
388
389endef
390define RUN_TEST
391+error_occurred=0;\
392$($(TEST)_COMMAND)\
393if [ $$error_occurred -gt 0 ]; then $(HANDLE_ERROR); fi;
394
395
396endef
397
398# Catch everything and parse the command line ourselves.
399.PHONY: %
400%:
401 # Ensure that $(QMK_BIN) works.
402 if ! $(QMK_BIN) hello 1> /dev/null 2>&1; then printf "$(MSG_PYTHON_MISSING)"; exit 1; fi
403ifdef NOT_REPO
404 printf "$(MSG_NOT_REPO)"
405endif
406ifndef SKIP_GIT
407 $(QMK_BIN) git-submodule --sync
408 # Check if the submodules are dirty, and display a warning if they are
409 if ! $(QMK_BIN) git-submodule --check 1> /dev/null 2>&1; then printf "$(MSG_SUBMODULE_DIRTY)"; fi
410endif
411 rm -f $(ERROR_FILE) > /dev/null 2>&1
412 $(eval $(call PARSE_RULE,$@))
413 $(eval $(call SET_SILENT_MODE))
414 # Run all the commands in the same shell, notice the + at the first line
415 # it has to be there to allow parallel execution of the submake
416 # This always tries to compile everything, even if error occurs in the middle
417 # But we return the error code at the end, to trigger travis failures
418 # The sort at this point is to remove duplicates
419 $(foreach COMMAND,$(sort $(COMMANDS)),$(RUN_COMMAND))
420 if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
421 $(foreach TEST,$(sort $(TESTS)),$(RUN_TEST))
422 if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
423
424lib/%:
425 git submodule sync $?
426 git submodule update --init $?
427
428.PHONY: git-submodule
429git-submodule:
430 $(QMK_BIN) git-submodule
431
432.PHONY: git-submodules
433git-submodules: git-submodule
434
435.PHONY: list-keyboards
436list-keyboards:
437 $(QMK_BIN) list-keyboards --no-resolve-defaults | tr '\n' ' '
438
439.PHONY: list-tests
440list-tests:
441 $(eval $(call LIST_TEST))
442
443.PHONY: generate-keyboards-file
444generate-keyboards-file:
445 $(QMK_BIN) list-keyboards --no-resolve-defaults
446
447.PHONY: clean
448clean:
449 echo -n 'Deleting .build/ ... '
450 rm -rf $(BUILD_DIR)
451 echo 'done.'
452
453.PHONY: distclean distclean_qmk
454distclean: distclean_qmk
455distclean_qmk: clean
456 echo -n 'Deleting *.bin, *.hex, and *.uf2 ... '
457 rm -f *.bin *.hex *.uf2
458 echo 'done.'
459
460ifneq ($(QMK_USERSPACE),)
461.PHONY: distclean_userspace
462distclean: distclean_userspace
463distclean_userspace: clean
464 echo -n 'Deleting userspace *.bin, *.hex, and *.uf2 ... '
465 rm -f $(QMK_USERSPACE)/*.bin $(QMK_USERSPACE)/*.hex $(QMK_USERSPACE)/*.uf2
466 echo 'done.'
467endif
468
469# Extra targets for formatting and/or pytest, running within the qmk/qmk_cli container to match GHA.
470CONTAINER_PREAMBLE := export HOME="/tmp"; export PATH="/tmp/.local/bin:\$$PATH"; python3 -m pip install --upgrade pip; python3 -m pip install -r requirements-dev.txt
471
472.PHONY: format-core
473format-core:
474 RUNTIME=docker ./util/docker_cmd.sh bash -lic "$(CONTAINER_PREAMBLE); qmk format-c --core-only -a && qmk format-python -a"
475
476.PHONY: pytest
477pytest:
478 RUNTIME=docker ./util/docker_cmd.sh bash -lic "$(CONTAINER_PREAMBLE); qmk pytest"
479
480.PHONY: format-and-pytest
481format-and-pytest:
482 RUNTIME=docker ./util/docker_cmd.sh bash -lic "$(CONTAINER_PREAMBLE); qmk format-c --core-only -a && qmk format-python -a && qmk pytest"